CURMOD=Val_0x0
Global Status Register
| CURMOD | Indicates the current mode of operation. 0 (Val_0x0): Device mode 1 (Val_0x1): Host mode |
| BUSERRADDRVLD | Bus error address valid. Indicates that the Global SoC Bus Error Address register (GBUSERRADDRLO or GBUSERRADDRHI) is valid and reports the first bus address that encounters a bus error. Write 0x1 to clear. |
| CSRTIMEOUT | CSR timeout. When this bit is set to 0x1, it indicates that the software performed a write or read to a controller register that could not be completed within predefined bus clock cycles (default: 0x1FFFF). Write 0x1 to clear. |
| DEVICE_IP | Device interrupt pending. This field indicates that there is a pending interrupt pertaining to peripheral (device) operation in the Device event queue. |
| HOST_IP | Host interrupt pending. This field indicates that there is a pending interrupt pertaining to xHC in the Host event queue. |
| ADP_IP | This bit is not used. |
| BC_IP | This bit is not used. |
| OTG_IP | This bit is not used. |
| SSIC_IP | This bit is not used. |
| CBELT | Current BELT value. In Host mode, this bit field indicates the minimum value of all received device BELT values and the BELT value that is set by the Set Latency Tolerance Value command. |